Citroen C1, Peugeot 107, 108 & Toyota Aygo Owners Club. (Discount code for CityBugStore: C1OC)

It is currently Mon Jun 17, 2019 3:47 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 35 posts ]  Go to page 1, 2, 3, 4  Next
Author Message
 Post subject: My 107 Envy
PostPosted: Mon Apr 01, 2019 9:29 am 
Offline
User avatar

Joined: Tue Feb 12, 2019 10:12 am
Posts: 134
Location: Netherlands
Drives: Peugeot 107 Envy '13
Image as posted before of my Peugeot 107 Envy from 2013:

Image

So I had a good weekend, the sun was shining and I finally received all my cables for the head unit upgrade. Because I had the fancy bluetooth radio I didn't have ISO cables but the so called quadlock. I had purchased a adapter for this, but when we connected everything the HU didn't work. Seemed that Peugeot didn't use any standard quad lock layout, so we needed the change a few pins in the adapter. Then we had the problem that there wasn't a switched live, only a permanent live, but finally we found a cable to tap switched live from. The whole process took around 5 hours, including fitting the underseat subwoofer.

So, so so so many cables after fitting all the adapters:

Image

Many thanks to PatrolDave & PirateTimelord for the suggestion of the DAB+ splitter

Image

The result with my new Pioneer DAB+ radio

Image

Unfortunately i forgot the bluetooth handsfree mic... so I need to attach that sometime soon. I've also put speaker cables on the rear output of the HU so that I can change the dashboard speakers to a coaxial (and put the door on the rear channel) or get a shelf with speakers for the back, without the hassle to remove the HU again.

So I've now fitted:
- Pioneer MVH-X580DAB head unit
- Kenwood KSC-SW11 underseat subwoofer

The sound is soooo much better :)


Last edited by NoscopeDog on Mon Apr 01, 2019 9:32 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Mon Apr 01, 2019 9:30 am 
Offline
User avatar

Joined: Tue Feb 12, 2019 10:12 am
Posts: 134
Location: Netherlands
Drives: Peugeot 107 Envy '13
A day after a good wash and light polish

Image

(with someone else's C1 on the left)


Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Mon Apr 01, 2019 10:41 am 
Offline
User avatar

Joined: Mon Mar 25, 2019 4:05 pm
Posts: 68
Location: Sweden
Drives: 2008 Peugeot 107
That is a lot cables, i don't think i have half the amount but still had problems to find room for them behind the cd player. Nice work to fit everything.

_________________
Peugeot 107, Volvo XC70 2.5T, BMW 125iC


Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Mon Apr 01, 2019 10:51 am 
Offline
User avatar

Joined: Tue Feb 12, 2019 10:12 am
Posts: 134
Location: Netherlands
Drives: Peugeot 107 Envy '13
Fredrik M wrote:
That is a lot cables, i don't think i have half the amount but still had problems to find room for them behind the cd player. Nice work to fit everything.


Haha yeah, it took some time to put all the cables in the space without squeezing too much on the other cables


Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Mon Apr 01, 2019 11:47 am 
Online
Full Member

Joined: Tue Feb 15, 2011 9:02 pm
Posts: 588
Drives: PEUGEOT 107
Looking and sounding good, be worth adding extra rear channel speakers, whether you go door, rear panel or shelf root, keep up the good work!


Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Wed Apr 03, 2019 11:14 am 
Offline
User avatar

Joined: Tue Feb 12, 2019 10:12 am
Posts: 134
Location: Netherlands
Drives: Peugeot 107 Envy '13
Steve107 wrote:
Looking and sounding good, be worth adding extra rear channel speakers, whether you go door, rear panel or shelf root, keep up the good work!


Thanks! I’m still in doubt if I should go for the speakers in the parcel or just use the door speakers as “rear”.


Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Fri Apr 05, 2019 4:26 pm 
Offline
User avatar

Joined: Tue Feb 12, 2019 10:12 am
Posts: 134
Location: Netherlands
Drives: Peugeot 107 Envy '13
So... After fitting the new HU and the subwoofer I made a huge mess with cables.

Image


So today was the day to tighten things up, because this was just because of lack of time.


I've fitting some Velcro tape on the back of the subwoofer so I didn't need to drill holes in the car:

Image


Ziptied the cables together under the chair (careful that it doesn't hit the rails for the chair, as my girlfriend is much smaller then me so the seat is adjusted many times) and ziptied a few meters of the power cable and remote cable behind the dashboard.

Image


Nothing to see when the seat is in driving position :D


Image

Needed to remove the HU for one more time because I forgot the bluetooth mic. Luckily for me I didn't have to remove the whole dashboard (?) again, but I could pull the HU out.

Image

I've also fitted an reverse camera above my numberplate but i'm not happy about the position yet. Also i'm not happy either about the monitor, so I need to rethink this. But this is the result right now.

Image


Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Fri Apr 26, 2019 5:41 pm 
Offline
User avatar

Joined: Tue Feb 12, 2019 10:12 am
Posts: 134
Location: Netherlands
Drives: Peugeot 107 Envy '13
Changing the HU and adding the subwoofer have made everything way better. But I wanted more. I've decided to change the dashboard speakers, but because I have the dash/doorspeaker combination, it took a little rewiring.

Many thanks to Enjay for posting his findings on this forum.

I've wired the 4 wires together (both positive and negative together) so the speakers in the door keeps on working when disconnecting the tweeter. For the new coax speakers in the dashboard I've run new wires from the HU.

Fitted these Sony XS FB1030

Image

New speakers VS stock speaker (tweeter)

Image

Took me a few hours all together, but fitted the new Sony's!

Image


Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Fri Apr 26, 2019 7:41 pm 
Offline
User avatar

Joined: Mon Mar 25, 2019 4:05 pm
Posts: 68
Location: Sweden
Drives: 2008 Peugeot 107
Nice work, i wish i had the door speakers too.

_________________
Peugeot 107, Volvo XC70 2.5T, BMW 125iC


Top
 Profile  
 
 Post subject: Re: My 107 Envy
PostPosted: Mon Apr 29, 2019 8:53 am 
Offline
User avatar

Joined: Tue Feb 12, 2019 10:12 am
Posts: 134
Location: Netherlands
Drives: Peugeot 107 Envy '13
Fredrik M wrote:
Nice work, i wish i had the door speakers too.


They aren't the great though. But i'm planning to replace those soon too. For sure now I've heard the improvement of the dash speakers: more clarity and doesn't distort on higher volumes

I'll probably replace the door speakers next week :D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 35 posts ]  Go to page 1, 2, 3, 4  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group